Steel Partitions

Steel partitioning is used predominantly in factory and warehouse environments, to divide areas within the workplace. Partitioning is demountable so is an ideal method of constructing workspaces, which are not permanent and can be relocated and re-used.

Call 0121 508 5877 to find out more

Email us for FREE help and advice

Partition Environments

Typical uses for partitioning include:

WAREHOUSE
FACTORY
OFFICES
MAINTENANCE WORKSHOPS
SECURE RETAIL STOCK AREAS
LABORATORIES
CLEAN ROOMS

Single Skin Partitioning

Steel partitioning is suppled as either single or double skin. Single skin steel partitioning is used for a number of applications, offices, walkways,  and creating segregated  areas. Single skin panels are usually supplied 1000mm wide with standard heights of 2400mm, 2700mm and 3000mm. However, in fill panels can be supplied where required and special height panels are also available. Doors are available as single or double side hung and single or double sliding. Single skin panels are bolted to the floor, meaning  the are easy to relocate, and can be either solid, mesh, half mesh or half glazed. The panels have a flush external side, whilst the jointings are on the internal face.

Typical panel configurations include:

FULL HEIGHT SOLID STEEL
FULL HEIGHT MESH
PART SOLID, STEEL PART MESH
PART SOLID STEEL, PART GLAZED

Single skin partitioning features:

• Panels are factory manufactured, reducing installation time
• Powder coated finish
• Large range of panel configurations available
• Can be installed in multi levels, providing additional security, and preventing dust ingress.
• Highly cost effective method to segregate areas
• Demountable panels, mean system can be dismantled and reused/reconfigured
• Damaged panels can be easily replaced
• Panels are factory manufactured, reducing installation time

Double Skin Partitioning

Double skin partitioning is ideal for creating high quality environments, where sound reduction and insulation is a requirement. Double skin steel partitioning is used where additional features over and above single skin is required. It is used to create offices and other working environments where sound and thermal insulation are desirable. This type of partitioning is also used to create testing facilities, laboratories, production offices, break out areas and has a less industrial look than single skin and can therefore be used to enhance areas where a semi-permanent construction is required.

Typical panel configurations include:

FULL HEIGHT SOLID
PART SOLID, STEEL PART GLAZED
FULL GLAZED WITH INTEGRAL BLINDS (if required)

Double skin partitioning features:

• Smooth finish on both sides of the panels
• Sound insulating properties
• Sound reduction from external noise
• Cables and wires can be hidden within the panels
• Wipe clean surfaces on both sides
• Demountable and relocatable panels
• Damaged panels can be easily replaced